Handlebar Reverse Seismic 810 Carbon 31.8mm / 25mm

Reverse Seismic 810 Carbon Handlebar, 31.8mm clamp, 25mm rise, Matt Black/White

The Seismic 810 is Reverse's carbon bar, built to calm the vibration and hits you get on long, rough descents. Reverse worked the carbon layup with the EFBE test lab in Germany to give it some compliance, so it takes the edge off impacts instead of feeling harsh. Less buzz through your hands, less arm pump on long runs.

It's tested to EFBE EPAC MTB-GR at E-Safety Level Category 5, so it's rated for e-MTB and downhill use, with a 130 kg maximum for bike plus rider. 810mm wide with cutting lines down to 720mm, 25mm rise, 7° backsweep and 5° upsweep. Reverse "Sandpaper" roughened zones at the stem clamp and grip area help stop the bar, grips, brakes and shifters from twisting.

This one has a 31.8mm clamp in Matt Black/White. It needs a 31.8mm stem. Carbon bar, so torque the stem and controls to spec. Not sure it fits your bike? Talk to us and we'll check.

Colour: Matt Black/White.

Key Features

• Carbon layup tuned for vibration damping
• 810mm wide, cutting lines down to 720mm
• 25mm rise, 7° backsweep, 5° upsweep
• EFBE EPAC MTB-GR tested, E-Safety Level Category 5
• Roughened "Sandpaper" stem and grip zones
• Alignment lines for setup

Specifications

• Width: 810mm (cutting lines down to 720mm)
• Clamp diameter: 31.8mm
• Rise: 25mm
• Backsweep: 7°
• Upsweep: 5°
• Weight: 200g (+/- 5%)
• Material: Carbon
• E-Safety Level: Category 5
• Testing: EFBE E-MTB Tri Test (EPAC MTB-GR)
• Max bike + rider weight: 130 kg
• Extras: Cutting lines, alignment lines, Sandpaper stem and grip zones
• Colour: Matt Black/White

Specs can change without notice from Reverse Components.